Boo in Pacifico SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Boo” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
What is in the file
| Size | 100 × 50 mm (3.94 × 1.98 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 4: 2 outer edges and 2 cut-outs |
| Cut length | 551 mm at this size |
| Narrowest part | 5.2 mm at this size |
| Nodes | 94 curve and line segments |
Measured from the file. PNG: 2,000 × 1,046 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.5 in (25 × 13 mm) | 1.3 mm | 140 mm | 170 | Vinyl, card and thin sheet |
| 2 × 1.01 in (51 × 26 mm) | 2.6 mm | 280 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.51 in (76 × 38 mm) | 4 mm | 420 mm | 21 | Any material, including 3 mm wood and acrylic |
| 4 × 2.02 in (102 × 51 mm) | 5.3 mm | 560 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 3.02 in (152 × 77 mm) | 7.9 mm | 840 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.03 in (203 × 102 mm) | 11 mm | 1,120 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.05 in (305 × 154 mm) | 16 mm | 1,679 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.