Free Boo SVG

Boo with a ghost SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boo with a ghost, as a solid black shape — Boo with a ghost. The preview is the SVG file itself.

“Boo” with a ghost above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 95 mm (3.94 × 3.74 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	8: 3 outer edges and 5 cut-outs
Cut length	824 mm at this size
Narrowest part	2.5 mm at this size
Nodes	164 curve and line segments

Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.95 in (25 × 24 mm)	0.64 mm	209 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.9 in (51 × 48 mm)	1.3 mm	419 mm	25	Vinyl, card and thin sheet
3 × 2.85 in (76 × 72 mm)	1.9 mm	628 mm	9	Vinyl, card and thin sheet
4 × 3.8 in (102 × 97 mm)	2.5 mm	837 mm	6	Vinyl, card and thin sheet
6 × 5.71 in (152 × 145 mm)	3.8 mm	1,256 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.61 in (203 × 193 mm)	5.1 mm	1,674 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.41 in (305 × 290 mm)	7.6 mm	2,512 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Boo SVG files

← Boo with a drop shadow All 14 Boo designs Boo in Pacifico →