Free Blessed SVG

Blessed in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Blessed in Alfa Slab One, as a solid black shape
Blessed in Alfa Slab One. The preview is the SVG file itself.

“Blessed” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 20 mm (3.94 × 0.78 in), scales to any size
Pieces7 separate pieces
Outlines to cut12: 7 outer edges and 5 cut-outs
Cut length543 mm at this size
Narrowest part2.8 mm at this size
Nodes137 curve and line segments

Measured from the file. PNG: 2,000 × 460 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.2 in (25 × 5 mm)0.71 mm138 mm300Fine detail: vinyl and paper only, weed with care
2 × 0.4 in (51 × 10 mm)1.4 mm276 mm100Vinyl, card and thin sheet
3 × 0.6 in (76 × 15 mm)2.1 mm414 mm45Vinyl, card and thin sheet
4 × 0.8 in (102 × 20 mm)2.8 mm552 mm24Vinyl, card and thin sheet
6 × 1.19 in (152 × 30 mm)4.3 mm828 mm8Any material, including 3 mm wood and acrylic
8 × 1.59 in (203 × 40 mm)5.7 mm1,103 mm6Any material, including 3 mm wood and acrylic
12 × 2.39 in (305 × 61 mm)8.5 mm1,655 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed SVG files

← Blessed in Lilita One All 13 Blessed designs Blessed in Amatic SC →