Free Blessed SVG

Blessed in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Blessed in Lilita One, as a solid black shape
Blessed in Lilita One. The preview is the SVG file itself.

“Blessed” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 22 mm (3.94 × 0.88 in), scales to any size
Pieces7 separate pieces
Outlines to cut12: 7 outer edges and 5 cut-outs
Cut length508 mm at this size
Narrowest part3.4 mm at this size
Nodes151 curve and line segments

Measured from the file. PNG: 2,000 × 506 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.22 in (25 × 6 mm)0.86 mm129 mm280Fine detail: vinyl and paper only, weed with care
2 × 0.45 in (51 × 11 mm)1.7 mm258 mm90Vinyl, card and thin sheet
3 × 0.67 in (76 × 17 mm)2.6 mm387 mm42Vinyl, card and thin sheet
4 × 0.89 in (102 × 23 mm)3.5 mm516 mm22Any material, including 3 mm wood and acrylic
6 × 1.34 in (152 × 34 mm)5.2 mm774 mm7Any material, including 3 mm wood and acrylic
8 × 1.78 in (203 × 45 mm)6.9 mm1,032 mm6Any material, including 3 mm wood and acrylic
12 × 2.68 in (305 × 68 mm)10 mm1,548 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed SVG files

← Blessed in Kaushan Script All 13 Blessed designs Blessed in Alfa Slab One →