Free Blessed SVG

Blessed in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Blessed in Amatic SC, as a solid black shape
Blessed in Amatic SC. The preview is the SVG file itself.

“Blessed” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 40 mm (3.94 × 1.59 in), scales to any size
Pieces7 separate pieces
Outlines to cut10: 7 outer edges and 3 cut-outs
Cut length835 mm at this size
Narrowest part2.4 mm at this size
Nodes219 curve and line segments

Measured from the file. PNG: 2,000 × 854 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.4 in (25 × 10 mm)0.61 mm212 mm200Fine detail: vinyl and paper only, weed with care
2 × 0.81 in (51 × 21 mm)1.2 mm424 mm60Vinyl, card and thin sheet
3 × 1.21 in (76 × 31 mm)1.8 mm636 mm24Vinyl, card and thin sheet
4 × 1.62 in (102 × 41 mm)2.4 mm848 mm12Vinyl, card and thin sheet
6 × 2.42 in (152 × 62 mm)3.7 mm1,273 mm4Any material, including 3 mm wood and acrylic
8 × 3.23 in (203 × 82 mm)4.9 mm1,697 mm3Any material, including 3 mm wood and acrylic
12 × 4.85 in (305 × 123 mm)7.3 mm2,545 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed SVG files

← Blessed in Alfa Slab One All 13 Blessed designs Blessed in block capitals →