Free Blessed SVG

Blessed with a cross SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Blessed with a cross, as a solid black shape — Blessed with a cross. The preview is the SVG file itself.

“Blessed” with a cross above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 74 mm (3.94 × 2.9 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	8: 3 outer edges and 5 cut-outs
Cut length	819 mm at this size
Narrowest part	1.2 mm at this size
Nodes	173 curve and line segments

Measured from the file. PNG: 2,000 × 1,492 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.74 in (25 × 19 mm)	0.3 mm	208 mm	130	Too fine for most machines
2 × 1.47 in (51 × 37 mm)	0.61 mm	416 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.21 in (76 × 56 mm)	0.91 mm	624 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.94 in (102 × 75 mm)	1.2 mm	832 mm	6	Vinyl, card and thin sheet
6 × 4.42 in (152 × 112 mm)	1.8 mm	1,248 mm	2	Vinyl, card and thin sheet
8 × 5.89 in (203 × 150 mm)	2.4 mm	1,664 mm	2	Vinyl, card and thin sheet
12 × 8.83 in (305 × 224 mm)	3.7 mm	2,496 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed SVG files

← Blessed with a drop shadow All 13 Blessed designs Blessed in Pacifico →