Free Blessed SVG

Blessed stencil plate SVG

Blessed stencil plate, as a solid black shape — Blessed stencil plate. The preview is the SVG file itself.

A rounded plate with “BLESSED” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 36 mm (3.94 × 1.4 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	789 mm at this size
Narrowest part	1.7 mm at this size
Nodes	122 curve and line segments

Measured from the file. PNG: 2,000 × 762 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.36 in (25 × 9 mm)	0.43 mm	200 mm	210	Too fine for most machines
2 × 0.71 in (51 × 18 mm)	0.86 mm	401 mm	65	Fine detail: vinyl and paper only, weed with care
3 × 1.07 in (76 × 27 mm)	1.3 mm	601 mm	27	Vinyl, card and thin sheet
4 × 1.42 in (102 × 36 mm)	1.7 mm	802 mm	14	Vinyl, card and thin sheet
6 × 2.14 in (152 × 54 mm)	2.6 mm	1,202 mm	5	Vinyl, card and thin sheet
8 × 2.85 in (203 × 72 mm)	3.5 mm	1,603 mm	4	Any material, including 3 mm wood and acrylic
12 × 4.27 in (305 × 109 mm)	5.2 mm	2,405 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed SVG files

← Blessed outline lettering All 12 Blessed designs Blessed with a drop shadow →