Free Blessed SVG

Blessed outline lettering SVG

Blessed outline lettering, drawn as a line — Blessed outline lettering. The preview is the SVG file itself.

“Blessed” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 21 mm (3.94 × 0.82 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	24: 12 outer edges and 12 cut-outs
Cut length	919 mm at this size
Narrowest part	1.3 mm at this size
Nodes	290 curve and line segments

Measured from the file. PNG: 2,000 × 477 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.21 in (25 × 5 mm)	0.33 mm	233 mm	290	Too fine for most machines
2 × 0.42 in (51 × 11 mm)	0.66 mm	467 mm	95	Fine detail: vinyl and paper only, weed with care
3 × 0.62 in (76 × 16 mm)	0.99 mm	700 mm	42	Fine detail: vinyl and paper only, weed with care
4 × 0.83 in (102 × 21 mm)	1.3 mm	934 mm	22	Vinyl, card and thin sheet
6 × 1.25 in (152 × 32 mm)	2 mm	1,401 mm	8	Vinyl, card and thin sheet
8 × 1.66 in (203 × 42 mm)	2.6 mm	1,867 mm	6	Vinyl, card and thin sheet
12 × 2.5 in (305 × 63 mm)	4 mm	2,801 mm	4	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed SVG files

← Blessed with hearts All 12 Blessed designs Blessed stencil plate →