Free Blessed SVG

Blessed with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Blessed with hearts, as a solid black shape
Blessed with hearts. The preview is the SVG file itself.

“Blessed” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 56 mm (3.94 × 2.2 in), scales to any size
Pieces8 separate pieces
Outlines to cut13: 8 outer edges and 5 cut-outs
Cut length834 mm at this size
Narrowest part1.2 mm at this size
Nodes212 curve and line segments

Measured from the file. PNG: 2,000 × 1,154 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.3 mm212 mm160Too fine for most machines
2 × 1.12 in (51 × 28 mm)0.61 mm424 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.68 in (76 × 43 mm)0.91 mm636 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.24 in (102 × 57 mm)1.2 mm847 mm10Vinyl, card and thin sheet
6 × 3.36 in (152 × 85 mm)1.8 mm1,271 mm3Vinyl, card and thin sheet
8 × 4.48 in (203 × 114 mm)2.4 mm1,695 mm2Vinyl, card and thin sheet
12 × 6.72 in (305 × 171 mm)3.7 mm2,542 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed SVG files

← Blessed with a swash underline All 13 Blessed designs Blessed outline lettering →