Free banner SVG

Scroll banner with rolled ends SVG

Scroll banner with rolled ends. The preview is the SVG file itself.

An open scroll: a flat sheet between two rolls, each on a rod with a knob at top and bottom. A thin slot marks where the sheet leaves each roll.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 58 mm (3.94 × 2.28 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	482 mm at this size
Narrowest part	2.7 mm at this size
Nodes	52 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,192 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.58 in (25 × 15 mm)	0.69 mm	122 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.16 in (51 × 29 mm)	1.4 mm	245 mm	40	Vinyl, card and thin sheet
3 × 1.74 in (76 × 44 mm)	2.1 mm	367 mm	18	Vinyl, card and thin sheet
4 × 2.32 in (102 × 59 mm)	2.7 mm	490 mm	8	Vinyl, card and thin sheet
6 × 3.48 in (152 × 88 mm)	4.1 mm	735 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.64 in (203 × 118 mm)	5.5 mm	979 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.96 in (305 × 177 mm)	8.2 mm	1,469 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More banner SVG files

← Hanging pennant banner on a rod All 20 banners Banner flag template with string holes →