Free banner SVG

Curved banner outline, sagging SVG

Curved banner outline, sagging. The preview is the SVG file itself.

A line drawing of the ribbon curved the other way, like a smile, with the folds filled in. Sits under a round design, or pairs with the arched ribbon to frame one.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 31 mm (3.94 × 1.22 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	549 mm at this size
Narrowest part	1.7 mm at this size
Nodes	61 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 671 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.31 in (25 × 8 mm)	0.43 mm	139 mm	230	Too fine for most machines
2 × 0.62 in (51 × 16 mm)	0.86 mm	279 mm	70	Fine detail: vinyl and paper only, weed with care
3 × 0.93 in (76 × 24 mm)	1.3 mm	418 mm	30	Vinyl, card and thin sheet
4 × 1.24 in (102 × 31 mm)	1.7 mm	558 mm	16	Vinyl, card and thin sheet
6 × 1.85 in (152 × 47 mm)	2.6 mm	837 mm	5	Vinyl, card and thin sheet
8 × 2.47 in (203 × 63 mm)	3.5 mm	1,116 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.71 in (305 × 94 mm)	5.2 mm	1,673 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More banner SVG files

← Curved ribbon banner All 20 banners Wavy ribbon banner →