Free banner SVG

Plain banner with notched ends SVG

Plain banner with notched ends. The preview is the SVG file itself.

A flat strip 100 mm long and 24 mm tall with a V notch cut into each end. No folds at all: the simplest banner shape to cut, weed and write on.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 24 mm (3.94 × 0.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	260 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	6 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 538 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.24 in (25 × 6 mm)	Over 1.5 mm	66 mm	270	Vinyl, card and thin sheet
2 × 0.48 in (51 × 12 mm)	Over 3 mm	132 mm	85	Any material, including 3 mm wood and acrylic
3 × 0.72 in (76 × 18 mm)	Over 4.6 mm	198 mm	39	Any material, including 3 mm wood and acrylic
4 × 0.96 in (102 × 24 mm)	Over 6.1 mm	264 mm	20	Any material, including 3 mm wood and acrylic
6 × 1.44 in (152 × 37 mm)	Over 9.1 mm	396 mm	7	Any material, including 3 mm wood and acrylic
8 × 1.92 in (203 × 49 mm)	Over 12 mm	528 mm	5	Any material, including 3 mm wood and acrylic
12 × 2.88 in (305 × 73 mm)	Over 18 mm	792 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More banner SVG files

← Double-fold banner outline All 20 banners Pennant bunting →