Free banner SVG

Party bunting with two swags SVG

Party bunting with two swags. The preview is the SVG file itself.

Two short strings of pennants that meet at a knot in the middle, three flags on each, as bunting hangs when it is pinned up at three points.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 29 mm (3.94 × 1.12 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	373 mm at this size
Narrowest part	2.1 mm at this size
Nodes	37 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 625 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.29 in (25 × 7 mm)	0.53 mm	95 mm	250	Fine detail: vinyl and paper only, weed with care
2 × 0.57 in (51 × 14 mm)	1.1 mm	189 mm	75	Vinyl, card and thin sheet
3 × 0.86 in (76 × 22 mm)	1.6 mm	284 mm	33	Vinyl, card and thin sheet
4 × 1.14 in (102 × 29 mm)	2.1 mm	379 mm	18	Vinyl, card and thin sheet
6 × 1.71 in (152 × 43 mm)	3.2 mm	568 mm	6	Any material, including 3 mm wood and acrylic
8 × 2.28 in (203 × 58 mm)	4.3 mm	758 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.42 in (305 × 87 mm)	6.4 mm	1,137 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More banner SVG files

← Heart bunting All 20 banners Hanging pennant banner on a rod →