Free banner SVG

Curved ribbon banner SVG

Curved ribbon banner. The preview is the SVG file itself.

The folded ribbon bent over an arch, so the band rises in the middle and the tails hang down at each side. Made to sit over a round design or the top of a monogram.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 46 mm (3.94 × 1.81 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	305 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	14 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 963 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.46 in (25 × 12 mm)	Over 1.5 mm	77 mm	180	Vinyl, card and thin sheet
2 × 0.92 in (51 × 23 mm)	Over 3 mm	155 mm	50	Any material, including 3 mm wood and acrylic
3 × 1.38 in (76 × 35 mm)	Over 4.6 mm	232 mm	21	Any material, including 3 mm wood and acrylic
4 × 1.84 in (102 × 47 mm)	Over 6.1 mm	310 mm	10	Any material, including 3 mm wood and acrylic
6 × 2.77 in (152 × 70 mm)	Over 9.1 mm	465 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.69 in (203 × 94 mm)	Over 12 mm	620 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.53 in (305 × 141 mm)	Over 18 mm	930 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More banner SVG files

← Ribbon banner outline All 20 banners Curved banner outline, sagging →