Free banner SVG

Ribbon banner outline SVG

Ribbon banner outline. The preview is the SVG file itself.

The classic ribbon as a line drawing 2 mm wide, with the two folds filled in solid. For print then cut, foil, engraving or a pen plotter.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 33 mm (3.94 × 1.28 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	614 mm at this size
Narrowest part	2 mm at this size
Nodes	46 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 702 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.33 in (25 × 8 mm)	0.51 mm	156 mm	230	Fine detail: vinyl and paper only, weed with care
2 × 0.65 in (51 × 17 mm)	1 mm	312 mm	70	Vinyl, card and thin sheet
3 × 0.98 in (76 × 25 mm)	1.5 mm	468 mm	30	Vinyl, card and thin sheet
4 × 1.3 in (102 × 33 mm)	2 mm	624 mm	16	Vinyl, card and thin sheet
6 × 1.95 in (152 × 50 mm)	3 mm	936 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.6 in (203 × 66 mm)	4.1 mm	1,248 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.9 in (305 × 99 mm)	6.1 mm	1,871 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More banner SVG files

← Ribbon banner with folded ends All 20 banners Curved ribbon banner →