Free banner SVG

Ribbon banner with folded ends SVG

Ribbon banner with folded ends. The preview is the SVG file itself.

The classic ribbon: a flat band 66 mm long and 22 mm tall for your words, with a swallowtail tail tucked behind each end. The folds are left open as notches, so it cuts as one clean piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 30 mm (3.94 × 1.18 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	304 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	14 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 654 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.3 in (25 × 8 mm)	Over 1.5 mm	77 mm	240	Vinyl, card and thin sheet
2 × 0.6 in (51 × 15 mm)	Over 3 mm	154 mm	75	Any material, including 3 mm wood and acrylic
3 × 0.9 in (76 × 23 mm)	Over 4.6 mm	232 mm	33	Any material, including 3 mm wood and acrylic
4 × 1.2 in (102 × 30 mm)	Over 6.1 mm	309 mm	16	Any material, including 3 mm wood and acrylic
6 × 1.8 in (152 × 46 mm)	Over 9.1 mm	463 mm	6	Any material, including 3 mm wood and acrylic
8 × 2.4 in (203 × 61 mm)	Over 12 mm	618 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.6 in (305 × 91 mm)	Over 18 mm	927 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More banner SVG files

← Layered ribbon banner in three colours All 20 banners Ribbon banner outline →