Free banner SVG

Banner shapes, set of five SVG

Banner shapes, set of five. The preview is the SVG file itself.

Five loose flag shapes in a row: triangle, swallowtail, scallop, point and square. Ungroup them and use each as a pattern piece for paper or fabric bunting.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 27 mm (3.94 × 1.06 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	5 outlines
Cut length	415 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	24 curve and line segments

Measured from the file. PNG: 2,000 × 596 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.27 in (25 × 7 mm)	Over 1.5 mm	105 mm	250	Vinyl, card and thin sheet
2 × 0.54 in (51 × 14 mm)	Over 3 mm	211 mm	80	Any material, including 3 mm wood and acrylic
3 × 0.81 in (76 × 21 mm)	Over 4.6 mm	316 mm	36	Any material, including 3 mm wood and acrylic
4 × 1.08 in (102 × 27 mm)	Over 6.1 mm	422 mm	18	Any material, including 3 mm wood and acrylic
6 × 1.62 in (152 × 41 mm)	Over 9.1 mm	632 mm	6	Any material, including 3 mm wood and acrylic
8 × 2.16 in (203 × 55 mm)	Over 12 mm	843 mm	5	Any material, including 3 mm wood and acrylic
12 × 3.24 in (305 × 82 mm)	Over 18 mm	1,265 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More banner SVG files

← Banner flag template with string holes All 20 banners Layered ribbon banner in three colours →