Free anchor SVG

Anchor with rope SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Anchor with rope, as a solid black shape
Anchor with rope. The preview is the SVG file itself.

A twisted rope runs through the ring, loops across the shank twice and trails away under one arm. Slanted slots mark the strands, so it reads as rope in a single colour.

What is in the file

Size72 × 100 mm (2.84 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut55: 1 outer edge and 54 cut-outs
Cut length1,105 mm at this size
Narrowest part1 mm at this size
Nodes296 curve and line segments

Measured from the file. PNG: 1,463 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.72 × 1 in (18 × 25 mm)0.25 mm281 mm130Too fine for most machines
1.44 × 2 in (37 × 51 mm)0.51 mm561 mm35Fine detail: vinyl and paper only, weed with care
2.16 × 3 in (55 × 76 mm)0.76 mm842 mm15Fine detail: vinyl and paper only, weed with care
2.88 × 4 in (73 × 102 mm)1 mm1,123 mm6Vinyl, card and thin sheet
4.33 × 6 in (110 × 152 mm)1.5 mm1,684 mm2Vinyl, card and thin sheet
5.77 × 8 in (147 × 203 mm)2 mm2,245 mm2Vinyl, card and thin sheet
8.65 × 12 in (220 × 305 mm)3 mm3,368 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More anchor SVG files

← Anchor outline All 14 anchors Anchor with chain →