Free anchor SVG

Anchor with a bow SVG

Anchor with a bow, as a solid black shape
Anchor with a bow. The preview is the SVG file itself.

A stockless anchor with a ribbon bow tied where the stock would be: two open loops, a round knot and two forked tails.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size75 × 100 mm (2.95 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length722 mm at this size
Narrowest part4.1 mm at this size
Nodes72 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,519 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.75 × 1 in (19 × 25 mm)1 mm183 mm120Vinyl, card and thin sheet
1.5 × 2 in (38 × 51 mm)2.1 mm367 mm35Vinyl, card and thin sheet
2.25 × 3 in (57 × 76 mm)3.1 mm550 mm12Any material, including 3 mm wood and acrylic
3 × 4 in (76 × 102 mm)4.2 mm734 mm6Any material, including 3 mm wood and acrylic
4.5 × 6 in (114 × 152 mm)6.2 mm1,100 mm2Any material, including 3 mm wood and acrylic
6 × 8 in (152 × 203 mm)8.3 mm1,467 mm1Any material, including 3 mm wood and acrylic
9 × 12 in (229 × 305 mm)12 mm2,201 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More anchor SVG files

← Anchor with a heart top All 14 anchors Anchor with a monogram ring →