Free anchor SVG

Anchor pattern SVG

Anchor pattern, as a solid black shape — Anchor pattern. The preview is the SVG file itself.

Eight small bold anchors scattered at different angles. Loose pieces, for scatter prints, gift wrap stencils and confetti.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 99 mm (3.94 × 3.89 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	16: 8 outer edges and 8 cut-outs
Cut length	1,169 mm at this size
Narrowest part	3.1 mm at this size
Nodes	240 curve and line segments

Measured from the file. PNG: 2,000 × 1,979 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.99 in (25 × 25 mm)	0.79 mm	297 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.98 in (51 × 50 mm)	1.6 mm	594 mm	25	Vinyl, card and thin sheet
3 × 2.97 in (76 × 75 mm)	2.4 mm	891 mm	9	Vinyl, card and thin sheet
4 × 3.96 in (102 × 100 mm)	3.1 mm	1,188 mm	4	Any material, including 3 mm wood and acrylic
6 × 5.93 in (152 × 151 mm)	4.7 mm	1,782 mm	1	Any material, including 3 mm wood and acrylic
8 × 7.91 in (203 × 201 mm)	6.3 mm	2,375 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.87 in (305 × 301 mm)	9.4 mm	3,563 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More anchor SVG files

← Ship anchor without a stock All 14 anchors Layered anchor with a rope in two colours →