Free anchor SVG

Anchor with a heart top SVG

Anchor with a heart top, as a solid black shape — Anchor with a heart top. The preview is the SVG file itself.

The ring at the top is replaced by an open heart, with the shank hanging from its point. For anniversaries, weddings and anyone who is somebody’s anchor.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	72 × 100 mm (2.84 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	591 mm at this size
Narrowest part	3 mm at this size
Nodes	63 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,465 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.72 × 1 in (18 × 25 mm)	0.76 mm	150 mm	130	Fine detail: vinyl and paper only, weed with care
1.44 × 2 in (37 × 51 mm)	1.5 mm	300 mm	35	Vinyl, card and thin sheet
2.17 × 3 in (55 × 76 mm)	2.3 mm	450 mm	15	Vinyl, card and thin sheet
2.89 × 4 in (73 × 102 mm)	3 mm	600 mm	6	Any material, including 3 mm wood and acrylic
4.33 × 6 in (110 × 152 mm)	4.6 mm	901 mm	2	Any material, including 3 mm wood and acrylic
5.78 × 8 in (147 × 203 mm)	6.1 mm	1,201 mm	2	Any material, including 3 mm wood and acrylic
8.66 × 12 in (220 × 305 mm)	9.1 mm	1,801 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More anchor SVG files

← Anchor with chain All 14 anchors Anchor with a bow →