Free anchor SVG

Anchor with a monogram ring SVG

Anchor with a monogram ring, as a solid black shape
Anchor with a monogram ring. The preview is the SVG file itself.

The shank is interrupted by an open ring 28 mm across, left empty for an initial. The ring carries the load, so the anchor is still one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size75 × 100 mm (2.95 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length675 mm at this size
Narrowest part3.5 mm at this size
Nodes58 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,519 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.75 × 1 in (19 × 25 mm)0.89 mm171 mm120Fine detail: vinyl and paper only, weed with care
1.5 × 2 in (38 × 51 mm)1.8 mm343 mm35Vinyl, card and thin sheet
2.25 × 3 in (57 × 76 mm)2.7 mm514 mm12Vinyl, card and thin sheet
3 × 4 in (76 × 102 mm)3.6 mm686 mm6Any material, including 3 mm wood and acrylic
4.5 × 6 in (114 × 152 mm)5.3 mm1,029 mm2Any material, including 3 mm wood and acrylic
6 × 8 in (152 × 203 mm)7.1 mm1,372 mm1Any material, including 3 mm wood and acrylic
9 × 12 in (229 × 305 mm)11 mm2,057 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More anchor SVG files

← Anchor with a bow All 14 anchors Split anchor for a name →