Free anchor SVG

Split anchor for a name SVG

Split anchor for a name, as a solid black shape — Split anchor for a name. The preview is the SVG file itself.

The classic anchor cut across the shank and pulled apart, each half finished with a straight rule along the cut. Type a name or a boat name into the gap. Two separate pieces.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	63 × 100 mm (2.46 × 3.94 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	3: 2 outer edges and 1 cut-out
Cut length	694 mm at this size
Narrowest part	3 mm at this size
Nodes	54 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,279 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.63 × 1 in (16 × 25 mm)	0.76 mm	176 mm	140	Fine detail: vinyl and paper only, weed with care
1.25 × 2 in (32 × 51 mm)	1.5 mm	353 mm	40	Vinyl, card and thin sheet
1.87 × 3 in (48 × 76 mm)	2.3 mm	529 mm	15	Vinyl, card and thin sheet
2.5 × 4 in (64 × 102 mm)	3 mm	705 mm	8	Any material, including 3 mm wood and acrylic
3.75 × 6 in (95 × 152 mm)	4.6 mm	1,058 mm	3	Any material, including 3 mm wood and acrylic
5 × 8 in (127 × 203 mm)	6.1 mm	1,410 mm	2	Any material, including 3 mm wood and acrylic
7.5 × 12 in (190 × 305 mm)	9.1 mm	2,115 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More anchor SVG files

← Anchor with a monogram ring All 14 anchors Anchor in a rope frame →