Free windmill SVG

Windmill outline SVG

Windmill outline, drawn as a line
Windmill outline. The preview is the SVG file itself.

The farm windmill as a line drawing: every blade traced, the two rings, the hub, the tail vane and the tower with its braces. For colouring, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size69 × 100 mm (2.73 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut39: 1 outer edge and 38 cut-outs
Cut length1,682 mm at this size
Narrowest part1.4 mm at this size
Nodes233 curve and line segments

Measured from the file. PNG: 1,412 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.69 × 1 in (18 × 25 mm)0.36 mm427 mm130Too fine for most machines
1.39 × 2 in (35 × 51 mm)0.71 mm854 mm35Fine detail: vinyl and paper only, weed with care
2.08 × 3 in (53 × 76 mm)1.1 mm1,282 mm15Vinyl, card and thin sheet
2.78 × 4 in (71 × 102 mm)1.4 mm1,709 mm8Vinyl, card and thin sheet
4.16 × 6 in (106 × 152 mm)2.1 mm2,563 mm2Vinyl, card and thin sheet
5.55 × 8 in (141 × 203 mm)2.8 mm3,418 mm2Vinyl, card and thin sheet
8.33 × 12 in (212 × 305 mm)4.3 mm5,127 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More windmill SVG files

← Texas windmill with a star All 12 windmills Dutch windmill →