Free windmill SVG

Dutch windmill SVG

Dutch windmill, as a solid black shape
Dutch windmill. The preview is the SVG file itself.

A tower mill from the Low Countries: four lattice sails on a tapering body, a domed cap, a railed gallery on two brackets, an arched door and two windows.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size75 × 100 mm (2.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut43: 1 outer edge and 42 cut-outs
Cut length1,086 mm at this size
Narrowest part2.2 mm at this size
Nodes253 curve and line segments

Measured from the file. PNG: 1,515 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.75 × 1 in (19 × 25 mm)0.56 mm276 mm120Fine detail: vinyl and paper only, weed with care
1.5 × 2 in (38 × 51 mm)1.1 mm552 mm35Vinyl, card and thin sheet
2.24 × 3 in (57 × 76 mm)1.7 mm828 mm12Vinyl, card and thin sheet
2.99 × 4 in (76 × 102 mm)2.2 mm1,103 mm6Vinyl, card and thin sheet
4.49 × 6 in (114 × 152 mm)3.4 mm1,655 mm2Any material, including 3 mm wood and acrylic
5.98 × 8 in (152 × 203 mm)4.5 mm2,207 mm1Any material, including 3 mm wood and acrylic
8.98 × 12 in (228 × 305 mm)6.7 mm3,310 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More windmill SVG files

← Windmill outline All 12 windmills Dutch windmill with tulips →