Free windmill SVG

Half windmill SVG

Half windmill, as a solid black shape — Half windmill. The preview is the SVG file itself.

The top half of the wheel standing on a flat bar, the kind made to sit on a mantel or over a doorway: nine whole blades and a half blade at each end.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 52 mm (3.94 × 2.03 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	16: 1 outer edge and 15 cut-outs
Cut length	916 mm at this size
Narrowest part	3.9 mm at this size
Nodes	128 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,069 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.52 in (25 × 13 mm)	0.99 mm	233 mm	170	Fine detail: vinyl and paper only, weed with care
2 × 1.03 in (51 × 26 mm)	2 mm	465 mm	45	Vinyl, card and thin sheet
3 × 1.55 in (76 × 39 mm)	3 mm	698 mm	18	Vinyl, card and thin sheet
4 × 2.06 in (102 × 52 mm)	4 mm	931 mm	10	Any material, including 3 mm wood and acrylic
6 × 3.1 in (152 × 79 mm)	5.9 mm	1,396 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.13 in (203 × 105 mm)	7.9 mm	1,861 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.19 in (305 × 157 mm)	12 mm	2,792 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More windmill SVG files

← Windmill head All 12 windmills Farmhouse windmill with a blank sign →