Free windmill SVG

Wind turbine windmill SVG

Wind turbine windmill, as a solid black shape
Wind turbine windmill. The preview is the SVG file itself.

A modern wind turbine: three long slim blades on a hub, a nacelle behind it and a tall tapering mast on a bolted foot. The blades are set a little off upright, as if turning.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size67 × 100 mm (2.62 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length366 mm at this size
Narrowest part3.2 mm at this size
Nodes40 curve and line segments

Measured from the file. PNG: 1,356 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.67 × 1 in (17 × 25 mm)0.81 mm93 mm140Fine detail: vinyl and paper only, weed with care
1.33 × 2 in (34 × 51 mm)1.6 mm186 mm35Vinyl, card and thin sheet
2 × 3 in (51 × 76 mm)2.4 mm279 mm15Vinyl, card and thin sheet
2.66 × 4 in (68 × 102 mm)3.3 mm372 mm8Any material, including 3 mm wood and acrylic
3.99 × 6 in (101 × 152 mm)4.9 mm558 mm2Any material, including 3 mm wood and acrylic
5.32 × 8 in (135 × 203 mm)6.5 mm744 mm2Any material, including 3 mm wood and acrylic
7.98 × 12 in (203 × 305 mm)9.8 mm1,116 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More windmill SVG files

← Dutch windmill with tulips All 12 windmills Pinwheel windmill on a stick →