Free windmill SVG

Farm windmill on a tower SVG

Farm windmill on a tower, as a solid black shape
Farm windmill on a tower. The preview is the SVG file itself.

The windmill that pumps water on a farm: a wheel of eighteen blades tied by two rings, a tail vane to turn it into the wind and a braced steel tower on four feet.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size69 × 100 mm (2.73 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut43: 1 outer edge and 42 cut-outs
Cut length1,359 mm at this size
Narrowest part2.1 mm at this size
Nodes289 curve and line segments

Measured from the file. PNG: 1,412 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.69 × 1 in (18 × 25 mm)0.53 mm345 mm130Fine detail: vinyl and paper only, weed with care
1.39 × 2 in (35 × 51 mm)1.1 mm690 mm35Vinyl, card and thin sheet
2.08 × 3 in (53 × 76 mm)1.6 mm1,036 mm15Vinyl, card and thin sheet
2.78 × 4 in (71 × 102 mm)2.1 mm1,381 mm8Vinyl, card and thin sheet
4.16 × 6 in (106 × 152 mm)3.2 mm2,071 mm2Any material, including 3 mm wood and acrylic
5.55 × 8 in (141 × 203 mm)4.3 mm2,761 mm2Any material, including 3 mm wood and acrylic
8.33 × 12 in (212 × 305 mm)6.4 mm4,142 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More windmill SVG files

← Farm windmill in a ring at sunset All 12 windmills Windmill head →