Free welder SVG

Welder torch with sparks SVG

Welder torch with sparks, as a solid black shape — Welder torch with sparks. The preview is the SVG file itself.

A wire-feed welding torch: a grip with a trigger, a curved neck, a nozzle and a contact tip, with a burst of sparks at the tip and the cable trailing from the grip.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 75 mm (3.94 × 2.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	358 mm at this size
Narrowest part	2.2 mm at this size
Nodes	67 curve and line segments

Measured from the file. PNG: 2,000 × 1,515 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.75 in (25 × 19 mm)	0.56 mm	91 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.5 in (51 × 38 mm)	1.1 mm	182 mm	35	Vinyl, card and thin sheet
3 × 2.24 in (76 × 57 mm)	1.7 mm	273 mm	12	Vinyl, card and thin sheet
4 × 2.99 in (102 × 76 mm)	2.2 mm	364 mm	6	Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)	3.4 mm	546 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.98 in (203 × 152 mm)	4.5 mm	727 mm	1	Any material, including 3 mm wood and acrylic
12 × 8.98 in (305 × 228 mm)	6.7 mm	1,091 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More welder SVG files

← Welder mask from the side All 13 welders Welder electrode holder with a rod →