Free welder SVG

Welder goggles SVG

Welder goggles, as a solid black shape — Welder goggles. The preview is the SVG file itself.

Round gas welding goggles: two deep lens cups joined by a bridge, with a strap running off each side through a slot. A simple, symmetrical shape for a small sticker.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 32 mm (3.94 × 1.25 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	451 mm at this size
Narrowest part	1.7 mm at this size
Nodes	75 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 688 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.32 in (25 × 8 mm)	0.43 mm	115 mm	230	Too fine for most machines
2 × 0.64 in (51 × 16 mm)	0.86 mm	229 mm	70	Fine detail: vinyl and paper only, weed with care
3 × 0.95 in (76 × 24 mm)	1.3 mm	344 mm	30	Vinyl, card and thin sheet
4 × 1.27 in (102 × 32 mm)	1.7 mm	458 mm	16	Vinyl, card and thin sheet
6 × 1.91 in (152 × 48 mm)	2.6 mm	687 mm	5	Vinyl, card and thin sheet
8 × 2.54 in (203 × 65 mm)	3.5 mm	916 mm	4	Any material, including 3 mm wood and acrylic
12 × 3.82 in (305 × 97 mm)	5.2 mm	1,375 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More welder SVG files

← Welder machine with its leads All 13 welders Welder heart with a weld seam →