Free welder SVG

Welder’s bead of ripples SVG

Welder’s bead of ripples, as a solid black shape — Welder’s bead of ripples. The preview is the SVG file itself.

A straight weld bead on its own: a long round-ended bar filled with crescent ripples, like a stack of coins pushed over. A border for a sign or a stripe for a toolbox.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 19 mm (3.94 × 0.75 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	14: 1 outer edge and 13 cut-outs
Cut length	663 mm at this size
Narrowest part	2.4 mm at this size
Nodes	231 curve and line segments

Measured from the file. PNG: 2,000 × 442 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.19 in (25 × 5 mm)	0.61 mm	168 mm	310	Fine detail: vinyl and paper only, weed with care
2 × 0.38 in (51 × 10 mm)	1.2 mm	337 mm	105	Vinyl, card and thin sheet
3 × 0.57 in (76 × 14 mm)	1.8 mm	505 mm	45	Vinyl, card and thin sheet
4 × 0.76 in (102 × 19 mm)	2.4 mm	674 mm	24	Vinyl, card and thin sheet
6 × 1.14 in (152 × 29 mm)	3.7 mm	1,010 mm	9	Any material, including 3 mm wood and acrylic
8 × 1.52 in (203 × 39 mm)	4.9 mm	1,347 mm	7	Any material, including 3 mm wood and acrylic
12 × 2.28 in (305 × 58 mm)	7.3 mm	2,021 mm	4	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More welder SVG files

← Welder heart with a weld seam All 13 welders Welder monogram frame →