Welder electrode holder with a rod SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The holder used for stick welding: an insulated grip with three lines, a jaw with its lever and a rod held at an angle, with a burst of sparks where the rod strikes.
What is in the file
| Size | 92 × 100 mm (3.61 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 455 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 57 curve and line segments |
| Also found as | Welding torch SVG |
Measured from the file. PNG: 1,838 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.92 × 1 in (23 × 25 mm) | 0.86 mm | 116 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.83 × 2 in (47 × 51 mm) | 1.7 mm | 231 mm | 30 | Vinyl, card and thin sheet |
| 2.75 × 3 in (70 × 76 mm) | 2.6 mm | 347 mm | 12 | Vinyl, card and thin sheet |
| 3.66 × 4 in (93 × 102 mm) | 3.5 mm | 462 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.5 × 6 in (140 × 152 mm) | 5.2 mm | 693 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.33 × 8 in (186 × 203 mm) | 6.9 mm | 925 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.99 × 12 in (279 × 305 mm) | 10 mm | 1,387 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More welder SVG files
-
Welder helmet in a burst of sparks Solid · one piece
-
Welder gas cylinders Solid · one piece
-
Welder machine with its leads Solid · one piece
-
Welder goggles Solid · one piece
-
Welder heart with a weld seam Solid · one piece
-
Welder’s bead of ripples Solid · one piece
-
Welder monogram frame Solid · one piece
-
Welder helmet outline Outline · one piece
← Welder torch with sparks All 13 welders Welder helmet in a burst of sparks →