Free welder SVG

Welder heart with a weld seam SVG

Welder heart with a weld seam, as a solid black shape — Welder heart with a weld seam. The preview is the SVG file itself.

A solid heart with a weld running down the middle of it: a row of crescent ripples from the notch most of the way to the point, the way a good bead looks. For a welder’s other half.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 90 mm (3.94 × 3.56 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	560 mm at this size
Narrowest part	2.5 mm at this size
Nodes	115 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.9 in (25 × 23 mm)	0.64 mm	142 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.81 in (51 × 46 mm)	1.3 mm	284 mm	30	Vinyl, card and thin sheet
3 × 2.71 in (76 × 69 mm)	1.9 mm	427 mm	12	Vinyl, card and thin sheet
4 × 3.62 in (102 × 92 mm)	2.5 mm	569 mm	6	Vinyl, card and thin sheet
6 × 5.42 in (152 × 138 mm)	3.8 mm	853 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.23 in (203 × 184 mm)	5.1 mm	1,138 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.85 in (305 × 276 mm)	7.6 mm	1,707 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More welder SVG files

← Welder goggles All 13 welders Welder’s bead of ripples →