Sound wave SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Twenty-three round-ended bars of different heights on a centre line, like a voice recording. The same left and right, and all one piece.
What is in the file
| Size | 100 × 49 mm (3.94 × 1.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 1,191 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 202 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,023 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.49 in (25 × 12 mm) | 0.53 mm | 303 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.98 in (51 × 25 mm) | 1.1 mm | 605 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.48 in (76 × 37 mm) | 1.6 mm | 908 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.97 in (102 × 50 mm) | 2.1 mm | 1,210 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.95 in (152 × 75 mm) | 3.2 mm | 1,815 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 3.94 in (203 × 100 mm) | 4.3 mm | 2,420 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 5.9 in (305 × 150 mm) | 6.4 mm | 3,630 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.