Free wave SVG

Wave in a circle SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wave in a circle, as a solid black shape
Wave in a circle. The preview is the SVG file itself.

The curling wave inside a ring, with the sea filled in beneath it down to the edge of the circle. A ready badge for stickers, coasters and surf-club patches.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length861 mm at this size
Narrowest part3.8 mm at this size
Nodes80 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.97 mm219 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.9 mm437 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)2.9 mm656 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)3.9 mm875 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)5.8 mm1,312 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)7.7 mm1,750 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)12 mm2,624 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wave SVG files

← Wave border All 15 waves Wave and sun →