Layered sea waves in three blues SVG
Three rows of swells to stack, pale at the back and dark at the front, with the crests staggered. Each layer runs to the bottom edge so they line up when glued.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 58 mm (3.94 × 2.28 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 3 outlines |
| Cut length | 935 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 100 curve and line segments |
| Layers | 3: far waves, middle waves and near waves |
Measured from the file. PNG: 2,000 × 1,192 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.58 in (25 × 15 mm) | Over 1.5 mm | 237 mm | 150 | Vinyl, card and thin sheet |
| 2 × 1.16 in (51 × 29 mm) | Over 3 mm | 475 mm | 40 | Any material, including 3 mm wood and acrylic |
| 3 × 1.74 in (76 × 44 mm) | Over 4.6 mm | 712 mm | 18 | Any material, including 3 mm wood and acrylic |
| 4 × 2.32 in (102 × 59 mm) | Over 6.1 mm | 950 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.48 in (152 × 88 mm) | Over 9.1 mm | 1,425 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.64 in (203 × 118 mm) | Over 12 mm | 1,900 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.96 in (305 × 177 mm) | Over 18 mm | 2,850 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.