Crashing wave with foam SVG
The curling wave with a row of foam bumps along its crest and down the lip, and one stripe inside. A livelier wave for surf and beach designs.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 76 mm (3.94 × 3 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 532 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 85 curve and line segments |
Measured from the file. PNG: 2,000 × 1,540 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.76 in (25 × 19 mm) | 0.81 mm | 135 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.52 in (51 × 39 mm) | 1.6 mm | 270 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.28 in (76 × 58 mm) | 2.4 mm | 405 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.04 in (102 × 77 mm) | 3.3 mm | 541 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.57 in (152 × 116 mm) | 4.9 mm | 811 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.09 in (203 × 155 mm) | 6.5 mm | 1,081 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.13 in (305 × 232 mm) | 9.8 mm | 1,622 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Two waves 
Wave border 
Wave in a circle 
Wave and sun 
Rolling ocean waves 
Three water waves 
Wave lines in a circle 
Seamless wave pattern 