Free wave SVG

Two waves SVG

Two waves, as a solid black shape — Two waves. The preview is the SVG file itself.

A large wave with a smaller one rising in its trough, kept apart by a slim gap that stops at the base. More movement than a single wave, in the same footprint.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 60 mm (3.94 × 2.38 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	585 mm at this size
Narrowest part	3.3 mm at this size
Nodes	91 curve and line segments

Measured from the file. PNG: 2,000 × 1,238 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.6 in (25 × 15 mm)	0.84 mm	149 mm	150	Fine detail: vinyl and paper only, weed with care
2 × 1.21 in (51 × 31 mm)	1.7 mm	297 mm	40	Vinyl, card and thin sheet
3 × 1.81 in (76 × 46 mm)	2.5 mm	446 mm	18	Vinyl, card and thin sheet
4 × 2.42 in (102 × 61 mm)	3.4 mm	594 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.62 in (152 × 92 mm)	5 mm	892 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.83 in (203 × 123 mm)	6.7 mm	1,189 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.25 in (305 × 184 mm)	10 mm	1,783 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wave SVG files

← Crashing wave with foam All 15 waves Wave border →