Curling ocean wave SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A wave caught as it breaks: the back rises from the left, the crest curls over a hollow and the lip turns in. Two stripes follow the back for a sense of moving water.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 70 mm (3.94 × 2.77 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 523 mm at this size |
| Narrowest part | 4.3 mm at this size |
| Nodes | 67 curve and line segments |
Measured from the file. PNG: 2,000 × 1,429 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.7 in (25 × 18 mm) | 1.1 mm | 133 mm | 130 | Vinyl, card and thin sheet |
| 2 × 1.41 in (51 × 36 mm) | 2.2 mm | 266 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.11 in (76 × 54 mm) | 3.3 mm | 399 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.81 in (102 × 71 mm) | 4.4 mm | 531 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 4.22 in (152 × 107 mm) | 6.6 mm | 797 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.62 in (203 × 143 mm) | 8.7 mm | 1,063 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.44 in (305 × 214 mm) | 13 mm | 1,594 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.