USA with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“USA” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 36 mm (3.94 × 1.43 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 5: 4 outer edges and 1 cut-out |
| Cut length | 1,139 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 247 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 773 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.36 in (25 × 9 mm) | Over 1.5 mm | 289 mm | 210 | Vinyl, card and thin sheet |
| 2 × 0.72 in (51 × 18 mm) | Over 3 mm | 579 mm | 65 | Any material, including 3 mm wood and acrylic |
| 3 × 1.09 in (76 × 28 mm) | Over 4.6 mm | 868 mm | 27 | Any material, including 3 mm wood and acrylic |
| 4 × 1.45 in (102 × 37 mm) | Over 6.1 mm | 1,157 mm | 14 | Any material, including 3 mm wood and acrylic |
| 6 × 2.17 in (152 × 55 mm) | Over 9.1 mm | 1,736 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.9 in (203 × 74 mm) | Over 12 mm | 2,314 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.34 in (305 × 110 mm) | Over 18 mm | 3,472 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More USA SVG files
-
USA with a waving flag Solid · 4 pieces
-
USA in Pacifico Solid · 2 pieces
-
USA in Lobster Solid · 3 pieces
-
USA in Kaushan Script Solid · 3 pieces
-
USA in Lilita One Solid · 3 pieces
-
USA in Alfa Slab One Solid · 3 pieces
-
USA in Amatic SC Solid · 3 pieces
-
USA in block capitals Solid · 3 pieces
← USA stencil plate All 13 USA designs USA with a waving flag →