Free USA SVG

USA in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

USA in Amatic SC, as a solid black shape
USA in Amatic SC. The preview is the SVG file itself.

“USA” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 83 mm (3.94 × 3.27 in), scales to any size
Pieces3 separate pieces
Outlines to cut4: 3 outer edges and 1 cut-out
Cut length869 mm at this size
Narrowest part4.3 mm at this size
Nodes162 curve and line segments

Measured from the file. PNG: 2,000 × 1,675 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.83 in (25 × 21 mm)1.1 mm221 mm110Vinyl, card and thin sheet
2 × 1.66 in (51 × 42 mm)2.2 mm441 mm30Vinyl, card and thin sheet
3 × 2.49 in (76 × 63 mm)3.3 mm662 mm12Any material, including 3 mm wood and acrylic
4 × 3.32 in (102 × 84 mm)4.4 mm883 mm6Any material, including 3 mm wood and acrylic
6 × 4.99 in (152 × 127 mm)6.6 mm1,324 mm2Any material, including 3 mm wood and acrylic
8 × 6.65 in (203 × 169 mm)8.7 mm1,766 mm1Any material, including 3 mm wood and acrylic
12 × 9.97 in (305 × 253 mm)13 mm2,649 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More USA SVG files

← USA in Alfa Slab One All 13 USA designs USA in block capitals →