Free USA SVG

USA with a waving flag SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

USA with a waving flag. The preview is the SVG file itself.

“USA” with a waving flag above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 92 mm (3.94 × 3.61 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	5: 4 outer edges and 1 cut-out
Cut length	783 mm at this size
Narrowest part	1.6 mm at this size
Nodes	98 curve and line segments

Measured from the file. PNG: 2,000 × 1,842 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.92 in (25 × 23 mm)	0.41 mm	199 mm	100	Too fine for most machines
2 × 1.84 in (51 × 47 mm)	0.81 mm	398 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.75 in (76 × 70 mm)	1.2 mm	597 mm	12	Vinyl, card and thin sheet
4 × 3.67 in (102 × 93 mm)	1.6 mm	796 mm	6	Vinyl, card and thin sheet
6 × 5.51 in (152 × 140 mm)	2.4 mm	1,193 mm	2	Vinyl, card and thin sheet
8 × 7.34 in (203 × 187 mm)	3.3 mm	1,591 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.02 in (305 × 280 mm)	4.9 mm	2,387 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More USA SVG files

← USA with a drop shadow All 13 USA designs USA in Pacifico →