Free USA SVG

USA in block capitals SVG

USA in block capitals, as a solid black shape — USA in block capitals. The preview is the SVG file itself.

“USA” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 64 mm (3.94 × 2.52 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	4: 3 outer edges and 1 cut-out
Cut length	789 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	59 curve and line segments

Measured from the file. PNG: 2,000 × 1,310 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.64 in (25 × 16 mm)	Over 1.5 mm	200 mm	140	Vinyl, card and thin sheet
2 × 1.28 in (51 × 33 mm)	Over 3 mm	401 mm	40	Any material, including 3 mm wood and acrylic
3 × 1.92 in (76 × 49 mm)	Over 4.6 mm	601 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.56 in (102 × 65 mm)	Over 6.1 mm	802 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.85 in (152 × 98 mm)	Over 9.1 mm	1,202 mm	3	Any material, including 3 mm wood and acrylic
8 × 5.13 in (203 × 130 mm)	Over 12 mm	1,603 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.69 in (305 × 195 mm)	Over 18 mm	2,405 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More USA SVG files

← USA in Amatic SC All 12 USA designs USA with a swash underline →