Free USA SVG

USA with stars SVG

USA with stars, as a solid black shape — USA with stars. The preview is the SVG file itself.

“USA” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 76 mm (3.94 × 2.99 in), scales to any size
Pieces	9 separate pieces
Outlines to cut	10: 9 outer edges and 1 cut-out
Cut length	874 mm at this size
Narrowest part	2.4 mm at this size
Nodes	188 curve and line segments

Measured from the file. PNG: 2,000 × 1,538 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.61 mm	222 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.52 in (51 × 39 mm)	1.2 mm	444 mm	35	Vinyl, card and thin sheet
3 × 2.28 in (76 × 58 mm)	1.8 mm	666 mm	12	Vinyl, card and thin sheet
4 × 3.04 in (102 × 77 mm)	2.4 mm	888 mm	6	Vinyl, card and thin sheet
6 × 4.56 in (152 × 116 mm)	3.7 mm	1,332 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.08 in (203 × 154 mm)	4.9 mm	1,776 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.12 in (305 × 232 mm)	7.3 mm	2,664 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More USA SVG files

← USA with a swash underline All 12 USA designs USA outline lettering →