Free USA SVG

USA stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

USA stencil plate, as a solid black shape
USA stencil plate. The preview is the SVG file itself.

A rounded plate with “USA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 62 mm (3.94 × 2.46 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length900 mm at this size
Narrowest part1.7 mm at this size
Nodes104 curve and line segments

Measured from the file. PNG: 2,000 × 1,277 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.62 in (25 × 16 mm)0.43 mm229 mm140Too fine for most machines
2 × 1.25 in (51 × 32 mm)0.86 mm457 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.87 in (76 × 48 mm)1.3 mm686 mm15Vinyl, card and thin sheet
4 × 2.5 in (102 × 63 mm)1.7 mm914 mm8Vinyl, card and thin sheet
6 × 3.74 in (152 × 95 mm)2.6 mm1,372 mm3Vinyl, card and thin sheet
8 × 4.99 in (203 × 127 mm)3.5 mm1,829 mm2Any material, including 3 mm wood and acrylic
12 × 7.49 in (305 × 190 mm)5.2 mm2,743 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More USA SVG files

← USA outline lettering All 13 USA designs USA with a drop shadow →