Free USA SVG

USA in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

USA in Lilita One, as a solid black shape
USA in Lilita One. The preview is the SVG file itself.

“USA” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 41 mm (3.94 × 1.6 in), scales to any size
Pieces3 separate pieces
Outlines to cut4: 3 outer edges and 1 cut-out
Cut length514 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes85 curve and line segments

Measured from the file. PNG: 2,000 × 860 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 10 mm)Over 1.5 mm131 mm200Vinyl, card and thin sheet
2 × 0.81 in (51 × 21 mm)Over 3 mm261 mm60Any material, including 3 mm wood and acrylic
3 × 1.22 in (76 × 31 mm)Over 4.6 mm392 mm24Any material, including 3 mm wood and acrylic
4 × 1.63 in (102 × 41 mm)Over 6.1 mm522 mm12Any material, including 3 mm wood and acrylic
6 × 2.44 in (152 × 62 mm)Over 9.1 mm783 mm4Any material, including 3 mm wood and acrylic
8 × 3.26 in (203 × 83 mm)Over 12 mm1,044 mm3Any material, including 3 mm wood and acrylic
12 × 4.88 in (305 × 124 mm)Over 18 mm1,567 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More USA SVG files

← USA in Kaushan Script All 13 USA designs USA in Alfa Slab One →