Trojan helmet from the front, Spartan style SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The helmet face on: two slanted eyes, a nose bar hanging between them, a gap down to the chin and cheek pieces that end in points, under a crest set across it like a fan. Symmetrical, and one piece.
What is in the file
| Size | 83 × 100 mm (3.27 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 851 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 83 curve and line segments |
| Symmetry | Mirror |
| Also found as | Spartan helmet vector SVG |
Measured from the file. PNG: 1,675 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.83 × 1 in (21 × 25 mm) | 0.79 mm | 216 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.66 × 2 in (42 × 51 mm) | 1.6 mm | 432 mm | 30 | Vinyl, card and thin sheet |
| 2.49 × 3 in (63 × 76 mm) | 2.4 mm | 648 mm | 12 | Vinyl, card and thin sheet |
| 3.32 × 4 in (84 × 102 mm) | 3.1 mm | 865 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.99 × 6 in (127 × 152 mm) | 4.7 mm | 1,297 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.65 × 8 in (169 × 203 mm) | 6.3 mm | 1,729 mm | 1 | Any material, including 3 mm wood and acrylic |
| 9.97 × 12 in (253 × 305 mm) | 9.4 mm | 2,594 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trojan SVG files
-
Trojan helmet without a crest Solid · one piece -
Trojan horse on wheels Solid · one piece -
Trojan shield with the wooden horse Solid · one piece -
Trojan sword and spear, crossed Solid · one piece -
Trojan helmet over a crossed sword and spear Solid · one piece -
Trojan mascot badge in a ring Solid · one piece -
Trojan helmet in a laurel wreath Solid · 2 pieces -
Trojan helmet outline Outline · one piece
← Trojan head in a helmet with a brush crest All 12 Trojans Trojan helmet without a crest →