Trojan sword and spear, crossed SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A short leaf-bladed sword and a long spear with a butt spike, crossed and welded where they meet. Use them alone, or behind a name, a number or one of the helmets.
What is in the file
| Size | 84 × 100 mm (3.3 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 497 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 36 curve and line segments |
Measured from the file. PNG: 1,690 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.84 × 1 in (21 × 25 mm) | 0.86 mm | 126 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 1.68 × 2 in (43 × 51 mm) | 1.7 mm | 252 mm | 30 | Vinyl, card and thin sheet |
| 2.52 × 3 in (64 × 76 mm) | 2.6 mm | 379 mm | 12 | Vinyl, card and thin sheet |
| 3.36 × 4 in (85 × 102 mm) | 3.5 mm | 505 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.03 × 6 in (128 × 152 mm) | 5.2 mm | 757 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.71 × 8 in (170 × 203 mm) | 6.9 mm | 1,010 mm | 1 | Any material, including 3 mm wood and acrylic |
| 10.07 × 12 in (256 × 305 mm) | 10 mm | 1,515 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trojan SVG files
-
Trojan helmet over a crossed sword and spear Solid · one piece -
Trojan mascot badge in a ring Solid · one piece -
Trojan helmet in a laurel wreath Solid · 2 pieces -
Trojan helmet outline Outline · one piece -
Trojan helmet on a red disc, in three colours Layered · 3 pieces -
Trojan helmet with a flowing crest Solid · one piece -
Trojan head in a helmet with a brush crest Solid · one piece -
Trojan helmet from the front, Spartan style Solid · one piece
← Trojan shield with the wooden horse All 12 Trojans Trojan helmet over a crossed sword and spear →