Trojan shield with the wooden horse SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A round shield with a rim line and the wooden horse, standing on its own legs, cut out of its middle, so the horse shows in whatever colour lies behind. One piece; the rim line is broken in four places to hold it together.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 1,134 mm at this size |
| Narrowest part | 6 mm at this size |
| Nodes | 87 curve and line segments |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 1.5 mm | 288 mm | 100 | Vinyl, card and thin sheet |
| 2 × 2 in (51 × 51 mm) | 3 mm | 576 mm | 25 | Any material, including 3 mm wood and acrylic |
| 3 × 3 in (76 × 76 mm) | 4.6 mm | 864 mm | 9 | Any material, including 3 mm wood and acrylic |
| 4 × 4 in (102 × 102 mm) | 6.1 mm | 1,152 mm | 4 | Any material, including 3 mm wood and acrylic |
| 6 × 6 in (152 × 152 mm) | 9.1 mm | 1,728 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 12 mm | 2,304 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 18 mm | 3,456 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Trojan SVG files
-
Trojan sword and spear, crossed Solid · one piece -
Trojan helmet over a crossed sword and spear Solid · one piece -
Trojan mascot badge in a ring Solid · one piece -
Trojan helmet in a laurel wreath Solid · 2 pieces -
Trojan helmet outline Outline · one piece -
Trojan helmet on a red disc, in three colours Layered · 3 pieces -
Trojan helmet with a flowing crest Solid · one piece -
Trojan head in a helmet with a brush crest Solid · one piece
← Trojan horse on wheels All 12 Trojans Trojan sword and spear, crossed →