Free Trojan SVG

Trojan mascot badge in a ring SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Trojan mascot badge in a ring, as a solid black shape
Trojan mascot badge in a ring. The preview is the SVG file itself.

The brush-crested helmet standing on a solid base inside a ring, welded so the badge cuts as one piece. Add the name of your school or team round the ring in your own lettering.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length1,111 mm at this size
Narrowest part1 mm at this size
Nodes185 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.25 mm282 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.51 mm564 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)0.76 mm847 mm9Fine detail: vinyl and paper only, weed with care
4 × 4 in (102 × 102 mm)1 mm1,129 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)1.5 mm1,693 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)2 mm2,258 mm1Vinyl, card and thin sheet
12 × 12 in (305 × 305 mm)3 mm3,386 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Trojan SVG files

← Trojan helmet over a crossed sword and spear All 12 Trojans Trojan helmet in a laurel wreath →